Local care · Family business since 1984Engineer visits Monday–Thursday

BROWSE THE QUESTIONS

Washing machines guidance

A wash that stops needs a clear next step. Tell us whether filling, drum movement, draining or spinning has changed.

Find the observation that matches.

159 guides. The titles describe different symptoms, operating stages or enquiry decisions.

Search this type
Washing machines

Can I increase spin speed to make every load dry faster?

A higher selectable speed is not automatically suitable for every fabric. The garment and programme limits remain part of the decision.

Read the guide
Washing machines

Can I put a laundry capsule in the detergent drawer?

Follow the capsule and appliance instructions together. A drawer intended to flush loose detergent is not automatically suitable for an enclosed dose.

Read the guide
Washing machines

Can I rinse and reuse a full Grundig FiberCatcher cartridge?

Grundig treats this cartridge as a replacement-and-return item. Its care differs from a reusable lint screen or the washing machine's drain-pump filter.

Read the guide
Washing machines

Can I scrub the washing-machine drum with wire wool?

A stainless-looking drum still has surface-care restrictions. An abrasive cleaning method can create damage rather than resolve a deposit.

Read the guide
Washing machines

Can I spray water into the opening left by an automatic detergent drawer?

A removable drawer may be washable while the recess inside the appliance has different restrictions. Treat them as separate cleaning surfaces.

Read the guide
Washing machines

Can I use a manual detergent dose in an automatic-dosing washing machine?

Automatic reservoirs and manual compartments are not interchangeable. The correct arrangement depends on the exact machine and product.

Read the guide
Washing machines

Can I use fabric dye or colour remover in my washing machine?

Check both the washing-machine manual and the dye manufacturer's instructions before starting. A product described as a fabric treatment is not automatically suitable for use inside every washing machine.

Read the guide
Washing machines

Can I use laundry starch and fabric softener in the same washing programme?

Check the machine and starch instructions before combining treatments. Starching is a planned fabric finish, so the normal softener routine may need to change for that load.

Read the guide
Washing machines

Can I use my new washing machine if nobody has confirmed the transit bolts were removed?

Confirm the transport restraints have been removed before first use. A quiet initial fill does not demonstrate that the appliance is ready to spin.

Read the guide
Washing machines

Can I wash towels while running the washing-machine cleaning programme?

A maintenance programme has preparation rules of its own. Combining it with a laundry load can defeat its purpose or expose fabric to an unsuitable treatment.

Read the guide
Washing machines

Can every hand-wash-only garment go into the machine's wool programme?

The answer depends on both the garment instructions and the particular machine programme. A reassuring programme name is not universal permission.

Read the guide
Washing machines

Can liquid detergent be used with a delayed washing start?

The answer is model-specific. Some drawer designs and older instructions restrict liquid detergent when the wash will wait before starting.

Read the guide
Washing machines

Can powder in the fabric-conditioner compartment mark clothes?

The detergent compartment determines when a product enters the wash. Putting powder in the conditioner section can change its treatment and rinsing.

Read the guide
Washing machines

Can the installer reuse my old inlet hose when fitting a new washing machine?

Use the new appliance's specified hose arrangement. An old connection that reaches the tap is not automatically suitable for the replacement machine.

Read the guide
Washing machines

Can the second AutoDose tank hold a different detergent instead of softener?

Some AEG AutoDose arrangements permit alternative tank configurations. The capability must be confirmed before changing what the second reservoir contains.

Read the guide
Washing machines

Can wool clothes go into a Dark Care or Jeans wash?

Dark colour and delicate fibre are separate sorting decisions. A colour-care programme may not provide the treatment that wool requires.

Read the guide
Washing machines

Could demo mode explain why my Hoover washer lights up but will not start a wash?

Hoover identifies demonstration mode as one possible cause of unresponsive controls or a cycle that will not start. It is particularly useful context when a machine has just been installed after being used for display.

Read the guide
Washing machines

Could freezing weather explain why my washing machine suddenly will not fill or drain?

A washer in an unheated location may have a cold-weather problem in its water route. A sudden failure after a freezing night needs that context recorded before assuming a pump or valve has failed.

Read the guide
Washing machines

Could pale patches after washing come from products already on the clothes?

A mark noticed after washing may originate from earlier contact with another product. Its position and timing help distinguish that possibility from machine-wide damage.

Read the guide
Washing machines

Does AEG EF0 always mean the same fault as EF3?

AEG's guidance covers this warning family with several possible triggers, including foam, leakage and imbalance. Keep the exact variant and observed condition together.

Read the guide
Washing machines

Does Candy Snap&Wash mean I can skip checking the clothes' care labels?

A photograph-based programme suggestion still needs to suit the actual garments. Hidden labels, linings and trims are part of the load even when they are not clear in a photograph.

Read the guide
Washing machines

Does Ready in mean the wash starts or finishes in that many hours?

Finish-time and start-delay controls plan different moments. Reading the label correctly prevents a normal wait from being mistaken for a stalled wash.

Read the guide
Washing machines

Does Samsung HE1 or 6E mean I should run a hotter cleaning wash?

Samsung lists heater-related warnings requiring service. A maintenance wash is not a suitable way to investigate a recorded heating fault.

Read the guide
Washing machines

Does Samsung Ub, UE or Ur mean the motor has failed?

Samsung uses these related indications for an unbalanced load. Record them as one family rather than assuming each spelling identifies a different broken component.

Read the guide
Washing machines

Does a 12 kg Haier Multi Wash mean I can put 12 kg into its largest drum?

The advertised combined capacity is distributed across separate drums. Plan each load against the capacity and programme of the drum that will actually wash it.

Read the guide
Washing machines

Does a Mixed programme mean I can stop sorting colours?

Mixed generally describes permitted fabric combinations. It does not promise that unstable dyes or incompatible care labels can safely share a wash.

Read the guide
Washing machines

Does a Samsung LC or LE warning prove that water is leaking onto the floor?

Samsung associates this family with low water level or drain-hose checks on applicable models. Interpret the precise code through the model manual.

Read the guide
Washing machines

Does a cool door mean the washing machine is not heating?

The temperature of the outside of the door is not a reliable measurement of the water throughout a programme.

Read the guide
Washing machines

Does a flashing TwinDos Whites indicator mean I chose the wrong laundry colour?

Miele explains that the flashing Whites or Colours control can identify an empty cartridge compartment. The label should be read in its displayed context.

Read the guide
Washing machines

Does a new washing machine need an empty cycle before I put clothes in it?

Check the first-use instructions for the exact model. Commissioning, calibration and ordinary drum maintenance can use different programmes and detergent requirements.

Read the guide
Washing machines

Does a rust-coloured mark in the drum mean the whole drum is rusting?

A surface deposit and damaged metal are different observations. Keep the location and appearance clear before choosing a cleaner or assuming a replacement is needed.

Read the guide
Washing machines

Does an Outdoor programme automatically renew a waterproof coating?

Washing a technical garment and applying a proofing treatment are separate tasks. The programme must be matched to the garment and care product.

Read the guide
Washing machines

Does the washing-machine capacity mean wet or dry laundry weight?

Use the load definition in the model's instructions and the capacity for the selected programme. The number on the cabinet is not permission to pack every cycle equally.

Read the guide
Washing machines

How can I identify a washing machine without pulling it out?

The marketing name on the front may describe a whole range. A clear product-label photograph is more useful for model-specific advice.

Read the guide
Washing machines

How should I clean visible debris in the washing-machine door seal folds?

Routine seal care concerns accessible surfaces. It does not require pulling the seal away from its fixed mountings or opening the machine.

Read the guide
Washing machines

How should I describe a new washing-machine spin noise?

Describe the noise already heard and the machine movement separately. A short recording can help only if it was captured safely.

Read the guide
Washing machines

How should I describe an AEG E20-family drainage warning?

AEG identifies E20 and related variants with draining difficulties. Record the warning before clearing the display so the precise variant remains available.

Read the guide
Washing machines

How should I respond to a Samsung dC or dE door message before washing starts?

Samsung's door-code variants need checking against the full model. A door warning at the start differs from a locked door holding finished laundry.

Read the guide
Washing machines

How should an automatic detergent dispenser be prepared before a long absence?

A period without washing can require attention to stored detergent, as well as the ordinary appliance shutdown instructions.

Read the guide
Washing machines

How should bras and hooked garments be prepared for an underwear programme?

The specialist programme still requires suitable garments and careful loading. Exposed hooks can catch other fabric even in a gentle wash.

Read the guide
Washing machines

Is AI Wash the same feature as automatic detergent dosing?

These descriptions can work together but refer to different functions. Confirm the actual equipment and settings on the machine you own.

Read the guide
Washing machines

Is No Spin the same setting as Rinse Hold?

The settings can leave laundry in different end states. Check the model's option descriptions before assuming that either one is a drainage fault.

Read the guide
Washing machines

Is Samsung 8C the same warning as an uneven load?

Samsung describes 8C as a MEMS-sensor issue. Do not replace that recorded warning with Ub or UE merely because the machine also shook.

Read the guide
Washing machines

Is Samsung Pump Clean the same as cleaning the drain-pump filter?

Samsung's auto-dispenser Pump Clean function concerns the detergent dosing arrangement. It should not be confused with physical drainage-filter maintenance.

Read the guide
Washing machines

Is Samsung Smart Check the same as Smart Control?

The names describe different functions. Confusing them can lead to pressing diagnostic controls when you intended to operate the washer remotely.

Read the guide
Washing machines

Is a Miele CapDosing capsule used like an ordinary laundry pod?

CapDosing uses the machine's dedicated capsule arrangement. A specialist capsule and a conventional drum dose should not be treated as interchangeable packaging.

Read the guide
Washing machines

Is a little water left inside a used Miele CapDosing capsule normal?

Miele states that a small residual quantity can remain for technical reasons. Water inside a used capsule differs from an entire dispenser compartment remaining flooded.

Read the guide
Washing machines

Is a pause during the washing programme always a fault?

Quiet periods and changing estimates can be normal. A meaningful report explains what happened before the pause and whether the programme resumed.

Read the guide
Washing machines

Is a washing-machine cleaner the same as a descaler?

Product names can cover different tasks or combined formulations. Read the permitted appliance use and instructions before treating them as interchangeable.

Read the guide
Washing machines

Is my washing machine filling if I cannot see water through the door?

A low visible water level is not enough to diagnose a filling fault. Look at the programme's progress and the laundry rather than expecting a drum full of water.

Read the guide
Washing machines

Is the Steam option a separate refresh programme?

Steam can be added within a wash or provided as a separate treatment. The word alone does not tell you whether detergent and rinsing are involved.

Read the guide
Washing machines

Should I choose Rinse and Spin or Drain and Spin?

These choices do different work. Selecting the wrong one can add water when you intended only to remove it.

Read the guide
Washing machines

Should I keep topping up AutoDose before its refill indicator appears?

Follow the refill routine for the exact reservoir system. Continual small top-ups can make product changes and cleaning history harder to track.

Read the guide
Washing machines

Should a half-empty drum receive the same detergent dose as a full load?

Use the detergent instructions for load size, soil and water conditions. A familiar capful can be excessive or insufficient when those inputs change.

Read the guide
Washing machines

What access details matter for an integrated washing-machine repair?

A furniture door and the appliance door are different parts. Explain the fitted arrangement before anyone plans to remove the machine.

Read the guide
Washing machines

What can I check externally for Samsung bE1, bE2 or bE3?

Samsung lists these as button-related indications. A visible stuck control can be described without opening the fascia or treating every unresponsive button as an electronic failure.

Read the guide
Washing machines

What does Samsung AC or AE tell an engineer about a stopped wash?

Samsung identifies this group as a communication-related warning. It does not mean that the household Wi-Fi connection caused the washing fault.

Read the guide
Washing machines

What does noC mean when I select Miele MobileStart?

Miele expands noC as no connection. It is a networking state on applicable machines, not a shortened mechanical fault description.

Read the guide
Washing machines

What if a top-loader's inner lid will not close properly?

The inner lid and outer cabinet lid perform different jobs. A closed outer lid does not establish that the inner closure is correctly engaged.

Read the guide
Washing machines

What if the washing-machine filter cover will not open?

A maintenance instruction does not make every filter accessible or safe to open in the machine’s present condition.

Read the guide
Washing machines

What information matters with a Samsung 5C or 5E drainage code?

These Samsung code variants concern drainage, but the display alone does not identify a blocked filter or failed pump.

Read the guide
Washing machines

What is the difference between Prewash and Intensive on a washing machine?

These options can alter different parts of a programme. Choosing both automatically is not a substitute for understanding the soil and detergent arrangement.

Read the guide
Washing machines

What should I arrange before moving a washing machine if the transit bolts are missing?

Identify the correct transport restraints before the move. A bolt that happens to fit a hole is not evidence that it secures this machine correctly.

Read the guide
Washing machines

What should I change in i-DOS when switching to a concentrated detergent?

Automatic dosing still depends on the detergent information entered for the machine. A new concentration can make the old basic dose unsuitable.

Read the guide
Washing machines

What should I check when a Samsung washer shows 4C or 4E?

Samsung groups these codes with water-supply difficulties. The full model and the moment the code appears help distinguish an interrupted supply from another cause.

Read the guide
Washing machines

What should I do after a tissue breaks up in the wash?

Shredded paper in a completed load is a specific contamination event. Treat it separately from persistent lint appearing without a known source.

Read the guide
Washing machines

What should I do if a bra underwire is missing after washing?

A known missing metal part is useful information even before it causes a noise. Avoid improvised retrieval through the drum.

Read the guide
Washing machines

What should I do if water drips from the washing-machine hose connection at the tap?

A visible drip at the supply connection needs attention before further use. Record whether water comes from the tap body, the connector or the hose itself.

Read the guide
Washing machines

What should I do when a Bosch washing machine shows E23?

Bosch connects E23 with leakage or water in the appliance base. A dry patch of floor does not rule out water being retained inside the base area.

Read the guide
Washing machines

What should I do when clothes come out snagged or torn?

Keep damaged items. Stop further loads if a surface appears damaged or a new scraping sound accompanies the problem.

Read the guide
Washing machines

What should I include when reporting AEG E10 or an inlet-code variant?

AEG's inlet-code family concerns water supply. The full displayed code and product number are needed to choose the applicable model guidance.

Read the guide
Washing machines

What should I note when a Samsung washer shows UC or 9C?

Samsung lists supply-voltage warnings among these variants. Retain the complete code, because a number after 9C can be significant.

Read the guide
Washing machines

What should I record for a Samsung tE or tC temperature-sensor warning?

Samsung groups several tE and tC variants as temperature-sensor errors. Their suffixes should be retained rather than shortened to a generic heating problem.

Read the guide
Washing machines

What should I report about a Samsung OC, OE or OF warning?

Samsung lists these variants as overflow-related indications. The warning describes a detected condition, rather than confirming one particular replacement part.

Read the guide
Washing machines

What should I report if Shirts will not start on a Miele WMR 860?

Miele publishes a specific software-related support case for this model and programme. It should not be used as a universal explanation for any washer refusing to start.

Read the guide
Washing machines

What should I report when the washing machine trips the electricity?

An electrical trip requires stopping use. The stage at which it happened is useful evidence without deliberately reproducing the event.

Read the guide
Washing machines

When is Extra Rinse different from adding more detergent?

Extra Rinse changes the rinsing stage. Adding detergent changes the amount that needs to be washed and rinsed away.

Read the guide
Washing machines

Which drum am I controlling on the right-hand display of a Haier Multi Wash?

The UK Multi Wash design uses one display for two of its drums. Confirm the active drum selection before changing a programme or pressing Start.

Read the guide
Washing machines

Which safety check applies to an older Hotpoint or Indesit washing machine?

Hotpoint and Indesit have separate safety programmes for different generations of washing machine. Identify the actual appliance before assuming that a notice, or an earlier service visit, covers it.

Read the guide
Washing machines

Why are clothes badly creased before they reach the dryer or washing line?

Creases already present at unloading should be investigated as a washing and handling result. They are not evidence of a later drying problem.

Read the guide
Washing machines

Why are dark clothes covered in light fibres after washing?

Lint can transfer between fabrics during a wash. Identifying the source fabric is more useful than assuming every fibre came from inside the machine.

Read the guide
Washing machines

Why are the washer controls still locked after switching it off and on?

Some control locks remain enabled across normal power cycles. Restarting is not necessarily the documented way to release them.

Read the guide
Washing machines

Why are there small grey greasy particles on washed clothing?

Loose greasy deposits deserve a different description from a uniformly grey fabric. The soil carried by the load and its detergent treatment matter.

Read the guide
Washing machines

Why can I not choose 40 or 60 degrees on Eco 40–60?

Eco 40–60 is the name of a defined programme, rather than a promise that its temperature selector offers both numbers. Compare the care requirement with the programme description.

Read the guide
Washing machines

Why can SmartThings show my Samsung wash but not start it remotely?

Remote monitoring and remote control can require different appliance states. Seeing the washer in the app does not prove remote starting is enabled.

Read the guide
Washing machines

Why can my iPhone show Hoover One Touch information but not operate the washing machine?

The original One Touch system uses NFC and has specific phone compatibility limits. Installing its app does not mean every phone can communicate with the appliance.

Read the guide
Washing machines

Why can tea or coffee marks remain after a normal liquid-detergent wash?

A completed wash does not guarantee removal of every stain. The detergent's formulation and the textile's permitted treatment matter.

Read the guide
Washing machines

Why can the Miele app offer extras that I cannot select on the washer panel?

Miele documents an app-and-appliance option difference on certain networked machines, with software changes affecting availability. Confirm the model and update context.

Read the guide
Washing machines

Why did my Miele washer start sounding an end buzzer after an update?

Miele documents an update that enables an end-of-programme buzzer on certain machines. A new completion sound can therefore be a settings change.

Read the guide
Washing machines

Why do dark clothes show white powder-like marks after washing?

A pale surface deposit differs from colour loss within the fabric. Photograph the marks before assuming the washer has bleached the clothing.

Read the guide
Washing machines

Why do shirts crease when I fill the Shirts programme to the normal cotton capacity?

The machine's headline capacity does not automatically apply to a specialist shirts programme. Space and the intended finishing effect matter.

Read the guide
Washing machines

Why do towels feel stiff after washing even though they look clean?

Stiffness can reflect dosing, load and later drying conditions. Adding more softener immediately can hide the useful comparison.

Read the guide
Washing machines

Why does Beko Pet Hair Removal add stages to my normal wash?

On Beko models fitted with Pet Hair Removal, choosing the option changes the wash process. A longer sequence with more rinsing can be an expected result of selecting it.

Read the guide
Washing machines

Why does Miele say TwinDos is empty when I can still see detergent?

The displayed empty warning and the visible liquid level should both be reported. Miele's guidance includes an explanation other than a completely empty cartridge.

Read the guide
Washing machines

Why does Miele's information light mean different things with 1 and 2?

The accompanying number changes the maintenance message. Do not shorten both displays to an information-light fault.

Read the guide
Washing machines

Why does Samsung recommend calibration after moving a washing machine?

On applicable Samsung models, calibration establishes the load-sensing reference after installation or relocation. It is a documented owner procedure, not an internal repair test.

Read the guide
Washing machines

Why does TwinDos still show the old fill level after both cartridges were changed?

Miele documents a particular fill-indicator reset case when one cartridge prompted replacement and the other was changed at the same time. The displayed level is not always a direct visual measurement.

Read the guide
Washing machines

Why does a Miele W2 fail to recognise a newly fitted TwinDos cartridge?

Miele identifies missing cartridge barcode information as one specific cause on W2 machines. Recognition is a different question from whether the cartridge physically fits.

Read the guide
Washing machines

Why does a pre-soaked load produce more foam than usual?

Detergent already carried by the clothing contributes to the wash. The dose poured into the drawer may not be the entire product entering the drum.

Read the guide
Washing machines

Why does a quick wash leave heavily soiled clothes disappointing?

Quick programmes have a defined load and soil-level purpose. A short cycle that finishes correctly may still be the wrong choice for the laundry.

Read the guide
Washing machines

Why does a single heavy item come out wetter than an ordinary load?

An absorbent item can gather unevenly in the drum and affect spinning even when its dry weight seems modest.

Read the guide
Washing machines

Why does a small Miele cotton load still show a long programme time?

Miele documents programme behaviour in which a smaller load does not automatically shorten the time as expected. Capacity and duration are different controls.

Read the guide
Washing machines

Why does a wool programme still need a wool-suitable detergent?

Gentle drum movement does not make every detergent suitable for wool. The textile, programme and product must agree.

Read the guide
Washing machines

Why does adding AEG Plus Steam reduce the displayed load allowance?

An extra treatment can have a smaller permitted load than the base wash. The capacity change may be an intended condition of the selected option.

Read the guide
Washing machines

Why does fabric conditioner disappear from the drawer before washing starts?

Early disappearance is different from conditioner remaining after the cycle. Check the fill level and dispenser arrangement before assuming a valve fault.

Read the guide
Washing machines

Why does laundry smell unpleasant immediately after washing?

Separate an odour present in freshly removed laundry from one that develops while damp items wait in the drum or basket.

Read the guide
Washing machines

Why does my Bosch washer show E32 or flash End with wet laundry?

Bosch describes this condition as an interrupted spin caused by uneven laundry distribution. The clothes may remain wet even though water has drained.

Read the guide
Washing machines

Why does my Haier washer spray water onto the door and gasket during rinsing?

On a model fitted with Smart Dual Spray, a directed spray at the window and gasket can be part of the designed cleaning action. Confirm the feature before calling it a leak.

Read the guide
Washing machines

Why does my LG Mini Washer show dE4 when I have closed its inner lid?

An LG Mini Washer has a drawer as well as the small lid over its drum. Closing the inner lid does not establish that the surrounding drawer has reached its normal closed position.

Read the guide
Washing machines

Why does my LG ezDispense washer keep requesting a refill when the container has detergent?

An ezDispense refill alert can require attention to the removable dispensing container, not another top-up. Identify which compartment the alert names before adding anything.

Read the guide
Washing machines

Why does my Miele washer request an empty wash after a RemoteUpdate?

Some Miele software updates introduce settings that require the washer to recalibrate. An explicitly requested empty programme can therefore be part of completing that update, even on a machine that has been used for years.

Read the guide
Washing machines

Why does my Miele washer show Hot water inlet fault?

Use the exact message and the appliance's connection configuration. A dedicated hot-water inlet warning should not be treated as a generic instruction to alter a cold-fill machine.

Read the guide
Washing machines

Why does my Miele washer show SmartStart by instead of an ordinary start time?

On compatible Miele machines, SmartGrid changes how the timer is presented. SmartStart defines an allowed starting window rather than simply asking the washer to begin at one chosen clock time.

Read the guide
Washing machines

Why does my Miele washer show UP but refuse to start the update?

Miele documents a particular RemoteUpdate problem in which UP is displayed and illuminated Start/Add laundry and Timer controls do not respond. An overlapping TwinDos message can be responsible on the applicable machines.

Read the guide
Washing machines

Why does my Samsung AddWash machine show DDC or DC3?

Samsung distinguishes the small add door from the main washing-machine door. These warnings need the AddWash context when being reported.

Read the guide
Washing machines

Why does my Samsung washer display tSt, t1 or t2?

Samsung lists these indications as test-mode states on applicable appliances. They should not be treated as ordinary programme names or guessed fault numbers.

Read the guide
Washing machines

Why does my Whirlpool washer still move or steam after the wash has finished?

FreshCare+ can continue treating laundry after the washing programme. Its selected state helps explain post-wash activity without assuming the machine has started another wash.

Read the guide
Washing machines

Why does my Whirlpool washer stop with a detergent amount in ml on the display?

On Whirlpool washers with Dosing Aid, a displayed detergent quantity can be an invitation to add the measured dose. The function recommends an amount; it does not necessarily dispense detergent from a storage tank.

Read the guide
Washing machines

Why does my detergent drawer have a movable liquid-detergent flap?

The flap changes how a compatible drawer retains liquid detergent. Its correct position depends on the product being used and the model's instructions.

Read the guide
Washing machines

Why does my replacement washing machine stick out further than the old one?

Nominal width does not establish the installed depth. The cabinet, door, connections and required clearances all affect whether a replacement fits the space.

Read the guide
Washing machines

Why does my washing machine rock slightly even when it is switched off?

A cabinet that rocks at rest needs its installation checked. Changing the laundry load cannot correct unstable support beneath the appliance.

Read the guide
Washing machines

Why does one section of my LG WashTower have power while the other is dark?

A WashTower can contain separate washer and dryer units with their own power connections. Identify which section has stopped responding before describing the whole tower as dead.

Read the guide
Washing machines

Why does selecting Samsung Bubble Soak add time to the wash?

Samsung describes Bubble Soak as an added soaking treatment on compatible programmes. A longer estimate after selecting it can be expected behaviour.

Read the guide
Washing machines

Why does the Download Cycle position no longer run the programme I expected?

A downloadable programme position can change when another cycle is transferred to the appliance. Its printed dial label need not identify the currently stored cycle.

Read the guide
Washing machines

Why does the Miele app say light soil while the washer says normal soil?

Miele explains that the washing assistant and the machine's TwinDos soil setting can serve different purposes. Their labels need not mirror each other automatically.

Read the guide
Washing machines

Why does the Miele app show 0% Eco usage after I used a Cottons Eco programme?

The Eco usage percentage is a programme-selection statistic. It is not a measurement showing that the washer used no electricity, nor a direct test of whether its heater worked.

Read the guide
Washing machines

Why does the TwinDos display show 30 ml when an UltraPhase 2 cartridge says 28 ml?

Miele has a specific support explanation for this published mismatch. Check that the cartridge, product phase and model match that case.

Read the guide
Washing machines

Why does the drum stay still for long periods on a wool wash?

A wool programme can use gentle movement and soaking rather than the movement pattern of a cotton wash. Stillness alone does not establish a drive fault.

Read the guide
Washing machines

Why does the manual recommend drying the seal after washing?

The door seal can retain moisture and residue even after the drum has emptied. A brief surface-care routine addresses that accessible area.

Read the guide
Washing machines

Why does the washer beep but refuse one programme option?

Programme tables restrict which options can be combined. A refused combination can be normal even when the option works on another cycle.

Read the guide
Washing machines

Why does the washing machine start but take in no water?

Distinguish a programme waiting to begin from one that has accepted Start but cannot take in water.

Read the guide
Washing machines

Why does the washing-machine door stay locked after washing?

A locked door can protect against moving laundry, retained water or heat. The control-lock symbol is not necessarily the door-lock indicator.

Read the guide
Washing machines

Why does washing net curtains need a different detergent dose and programme?

Net curtains can occupy a large part of the drum while weighing very little. Treating that volume as an ordinary full cotton load can lead to the wrong detergent dose and an unsuitable spin.

Read the guide
Washing machines

Why does water appear at the front when the washing machine first fills?

The time and first visible point of a leak are more useful than the eventual position of the puddle.

Read the guide
Washing machines

Why does water appear in the washing machine while it is not running?

Water returning after an empty drum has been observed is a different problem from a programme that never drained.

Read the guide
Washing machines

Why does water hardness matter when setting a detergent dose?

The detergent label can specify different quantities for different water conditions. An automatic dispenser still needs the appropriate starting information.

Read the guide
Washing machines

Why does water seem to run straight out while my washing machine is filling?

Water leaving during a fill can point to the drain installation. This differs from a machine that cannot pump water out at the end.

Read the guide
Washing machines

Why has concentrated fabric conditioner turned thick in the compartment?

The condition of the product and the drawer routine both matter. Thick residue should not automatically be described as a failed dispenser.

Read the guide
Washing machines

Why have white clothes become gradually grey rather than suddenly stained?

Gradual dulling is a pattern across repeated laundry care. It should be described differently from a new isolated mark after one wash.

Read the guide
Washing machines

Why is Grundig FiberCatcher active on some wash programmes but not others?

FiberCatcher is a dedicated synthetic-microfibre system, not an all-programme pump filter. Its programme and load requirements determine when it operates.

Read the guide
Washing machines

Why is Miele asking for TwinDos maintenance when I dose manually?

The TwinDos system has its own maintenance needs after a period without use. Ordinary manual washes do not necessarily run the reservoir-cleaning routine.

Read the guide
Washing machines

Why is Super Xpress unsuitable for my usual towel load?

Beko's programme instructions restrict the shortest Xpress setting to a small, lightly soiled load and exclude heavy cottons such as towels in the cited model.

Read the guide
Washing machines

Why is detergent left in the washing-machine drawer?

Residue in a dispenser needs to be interpreted alongside the product, compartment and point reached in the programme.

Read the guide
Washing machines

Why is detergent residue trapped inside folded or tightly packed laundry?

Residue held in folds can reveal how the load moved and rinsed. It is different from unused powder left in the dispenser drawer.

Read the guide
Washing machines

Why is laundry warm after my Miele washing programme finishes?

On applicable Miele models, Pre-ironing adds a steam treatment near the end. That option can explain warmth after washing without a drying cycle being selected.

Read the guide
Washing machines

Why is my Miele washing machine stuck on rotating bars after AddLoad?

An unresponsive AddLoad display needs different handling from a normal refusal to open a hot or water-filled drum. Preserve the display details and keep the door closed.

Read the guide
Washing machines

Why is my top-loader's drum opening not at the top after washing?

Some top-loading machines position their inner drum opening automatically. Failure to finish in that position is a different issue from a locked outer lid.

Read the guide
Washing machines

Why is the detergent level in my Miele TwinDos cartridge not going down?

Miele advises checking whether TwinDos is selected and compatible with the programme. A reservoir that remains full does not by itself prove a pump failure.

Read the guide
Washing machines

Why is there a little water in a brand-new washing machine?

Some new machines retain water from factory checks. The amount, location and delivery condition matter more than assuming that any dampness means previous use.

Read the guide
Washing machines

Why is there still a lot of foam during the washing-machine rinse?

Persistent foam can change programme behaviour. Record the detergent and load before assuming a rinse component has failed.

Read the guide
Washing machines

Why is water still in the washing machine after the cycle?

Water remaining in the drum and clothes that are merely wetter than expected are different observations. Establish which has happened before requesting a repair.

Read the guide
Washing machines

Why might AutoDose need switching off for a maintenance wash?

The detergent requirements of a machine-cleaning programme can differ from ordinary laundry. An automatic reservoir should not add an unintended extra dose.

Read the guide
Washing machines

Why might Miele Freshen up or Pre-ironing be unavailable on a newly installed washer?

Miele identifies incomplete initial commissioning as a cause on applicable models. The first-use process can matter before a steam feature becomes available.

Read the guide
Washing machines

Why might a Samsung 4C2 or 4E2 message appear after installation?

Samsung's temperature-related supply codes must be distinguished from the simpler 4C or 4E fill warning. The extra character changes the information to report.

Read the guide
Washing machines

Why might a detergent pod be unsuitable when Prewash is selected?

A single drum dose may not match a programme that separates prewash from the main wash. Check the machine's instructions before combining them.

Read the guide
Washing machines

Why should I stop if a TwinDos cartridge is difficult to insert?

A cartridge should be prepared and seated through its documented normal movement. Extra force can damage the connection or create a leak.

Read the guide
Washing machines

Why will the Miele app not operate the washer after I select MobileStart?

On applicable machines, choosing MobileStart is only part of the local preparation. Miele also requires the relevant Start control to be activated.

Read the guide
Washing machines

Why will the Reload button not let me add a forgotten item?

Reload is conditional on the machine being able to release the door safely. Availability can change as the wash progresses.

Read the guide
Washing machines

Will installing hOn bring my older Candy or Hoover washing machine across from its original app?

A successful hOn login does not establish that an older appliance is compatible. The app named for the machine matters, even when the same manufacturer group supplies both apps.

Read the guide

LET’S GET THE DETAILS RIGHT

Tell us what has changed.

Have the model, symptom and postcode ready. We’ll confirm suitable work and availability.

CallBook onlineRepair help