General guidance · Washing machines

Identify the timing and the affected stage

LG's UK guidance explains that water remaining in supply or drain hoses can freeze, and discusses FF and OE messages in that situation. Those codes and meanings are model-dependent; an outlet error does not prove there is ice. Note whether the machine fails at the first fill or later when draining, whether other nearby water supplies are affected, and whether the room has recently been below freezing. Observe accessible hoses without moving a heavy or integrated appliance.

Arrange a suitable thawing assessment

Do not keep restarting the machine against a suspected frozen water route. Follow the thawing and cold-weather instructions for the exact model, or obtain help if hoses and drainage cannot be accessed safely. Generic quantities of hot water are not a substitute for those instructions. Before reuse, the water route must be thawed and checked for leakage or damage. If the location regularly freezes, discuss the installation conditions and periods of non-use with the installer rather than treating each winter stoppage as an unrelated breakdown.

Useful observations

  • Record the room conditions and the point at which the cycle stopped.
  • Photograph the complete error message without repeatedly restarting.

Details to include in your enquiry

  • Did the problem first appear during freezing weather?
  • Is the machine failing to take in water, empty it, or both?

An inspection confirms the fault. Do not dismantle the appliance or reproduce an unsafe symptom to answer a question.

Further information

Your model’s instructions take precedence over general guidance.