Recognise the dosing pause
The applicable Whirlpool instructions describe a short load-sensing movement followed by a recommended quantity in millilitres. The owner then adds detergent and confirms Start/Pause to continue. Check your model's Dosing Aid chapter, especially if prewash or a delayed start is selected. Drawer, door and prewash instructions differ between versions, so do not borrow a button sequence from another Whirlpool machine. If detergent is already in the machine, account for that quantity before adding anything else.
Check the stored assumptions
Dosing Aid needs initial settings that match the detergent's recommended dose and local water hardness. A change to a more concentrated product can make old settings inappropriate. Compare the displayed amount with the product and load before treating a surprising number as an electronic fault. If the machine remains stopped after the correct dosing confirmation, record the display, selected options and any separate fault message. A plain ml recommendation and an error code describe different situations.
Useful observations
- Find the Dosing Aid instructions for the full model or service number.
- Check whether detergent has already been added to this load.
Details to include in your enquiry
- Does the display show an ml quantity after load sensing?
- Have the detergent concentration or saved dosing settings changed?
An inspection confirms the fault. Do not dismantle the appliance or reproduce an unsafe symptom to answer a question.
Further information
Your model’s instructions take precedence over general guidance.