General guidance · Washing machines

Check the intended compartment

Identify the conditioner compartment using the drawer markings and the model instructions. On conventional dispensers, filling above the maximum mark can allow the contents to discharge early. A recently cleaned or incorrectly refitted removable insert is also relevant to report. Do not use the main-wash or automatic-dosing reservoir as if it were the ordinary conditioner compartment; their operation can differ.

Avoid compensating with more product

Do not repeatedly top up the compartment because its level has fallen. This can add more conditioner than intended. With the appliance off, inspect and clean only the removable parts described in its instructions, and refit them as directed. If a correctly filled compartment still empties unexpectedly, photograph its arrangement and report when this happens. Distinguish product entering the drum from liquid leaking outside the drawer, which requires stopping use and attention to the leak.

Useful observations

  • Record the product type and level relative to the MAX marking.
  • Note whether the drawer or insert was recently cleaned.

Details to include in your enquiry

  • Did the level fall before Start was pressed?
  • Does the machine have a conventional drawer or automatic dosing?

An inspection confirms the fault. Do not dismantle the appliance or reproduce an unsafe symptom to answer a question.

Further information

Your model’s instructions take precedence over general guidance.