General guidance · Washing machines

Compare the complete installation

Bosch recommends checking height, width and depth when planning a move. Use the replacement model's dimension drawing and distinguish cabinet depth from its overall depth with the door and controls. Photograph the available space from the front and side where accessible. Note any pipework, tap or socket behind the appliance; the position of those services may differ from the old machine's requirements.

Avoid forcing the appliance backwards

Beko's installation instructions warn against trapping hoses or the cable when positioning a machine. A proud front may therefore be a fit problem requiring installation changes, rather than a reason to push harder. Ask the installer to check the actual obstruction and clearances. Keep the door opening and normal loading route in the plan. Moving plumbing, altering cabinetry or removing appliance parts should not be improvised to recover a few centimetres.

Useful observations

  • Compare the dimension drawing with the actual service positions.
  • Measure the available opening without moving a connected appliance.

Details to include in your enquiry

  • Does the quoted depth include the door and connections?
  • Can the appliance door open properly in its intended position?

An inspection confirms the fault. Do not dismantle the appliance or reproduce an unsafe symptom to answer a question.

Further information

Your model’s instructions take precedence over general guidance.