Follow the installation sequence
Beko's published instructions illustrate why a universal first-wash recipe is unreliable: one model manual specifies an empty hot cotton programme with detergent, while another installation guide describes an empty drum-cleaning calibration arrangement. Do not combine these instructions. Ask the installer which initial procedure applies to your product number and whether it has already been completed before delivery handover.
Keep first use separate from a fault test
The appliance must first be correctly unpacked, connected and positioned. A commissioning cycle is not a way to check whether visible damage, an active leak or violent movement will disappear. If installation was interrupted, record what was completed and leave the remaining steps for the installer. Once commissioning is confirmed, choose the first clothing wash by its fabric labels and load size; do not assume that the empty-cycle temperature is suitable for those clothes.
Useful observations
- Find the first-use section rather than relying on a general cleaning tip.
- Confirm whether commissioning was completed during installation.
Details to include in your enquiry
- Does this model require detergent during its initial empty programme?
- Is the requested procedure commissioning, calibration or routine maintenance?
An inspection confirms the fault. Do not dismantle the appliance or reproduce an unsafe symptom to answer a question.
Further information
Your model’s instructions take precedence over general guidance.