Observe the boundary of the water
Haier describes Smart Dual Spray on the cited X5 model as spraying the porthole gasket and window during rinsing to limit collected residue. Note whether the water stays inside the sealed drum area or appears outside the door. An internal jet following the normal programme is different from water escaping onto the cabinet or floor. Check the product information for your exact model rather than relying on a similar front-panel appearance.
Keep automatic spray separate from owner care
The feature does not establish that every visible fold is clear or that a damaged seal can be ignored. Follow the manual for accessible seal and door cleaning when the machine is stopped. If a previously familiar spray changes or water escapes, record the programme stage and visible location without running another cycle for a video. Do not cover a spray opening or insert anything into it to alter the water path.
Useful observations
- Confirm Smart Dual Spray is fitted to the model.
- Distinguish an internal jet from water outside the door seal.
Details to include in your enquiry
- Was the spray seen during the normal rinse stage?
- Is there any external leak or visible damage at the door?
An inspection confirms the fault. Do not dismantle the appliance or reproduce an unsafe symptom to answer a question.
Further information
Your model’s instructions take precedence over general guidance.