General guidance · Plumbing

Include drainage when the shower flow changes

Mira states that the waste supplied with a shower tray and its drainage capacity vary by tray model. An existing tray cannot therefore be assumed to handle a changed shower solely because the new head fits the same hose or rail. If water now builds up after an upgrade, record what was changed and whether the problem occurs with one outlet or both outlets operating together, where the system is designed for that use. Stop before water reaches the tray edge. Do not increase the flow repeatedly to demonstrate the overflow.

Separate an upgrade mismatch from a later restriction

Tell the installer whether drainage was satisfactory before the work, slow from the first use afterwards, or gradually worsened over time. Include the tray and waste models if known, the shower arrangement and any recent change to the waste pipe. Published waste capacity describes specified conditions; the connected pipework and actual installation also require assessment. Clear only removable hair catchers that the model instructions identify for owner cleaning. A larger waste opening or a new cover is not automatically a capacity upgrade. The enquiry should consider the complete incoming-flow and drainage arrangement before a replacement part is selected.

Useful observations

  • Record the shower changes and when tray ponding first appeared.
  • Find the tray and waste model, not only the shower-head name.

Details to include in your enquiry

  • Was drainage satisfactory before the shower was changed?
  • Does ponding happen with one outlet or a permitted combined-outlet setting?

An assessment establishes the appropriate work. Leave fixed fittings and concealed connections in place, and do not reproduce an unsafe symptom.

Further information

Your model’s instructions take precedence over general guidance.