General guidance · Plumbing

Account for every removable part

McAlpine’s top-access shower-trap instructions describe cleaning the removable grid and dip tube, then replacing both. They also warn against damaging the dip-tube O-ring and against chemical drain cleaner in that product. If drainage or an odour changed immediately after cleaning, check which pieces were taken out and whether any seal was left aside. Follow the instructions for the actual trap; a decorative cover, cleaning insert and the fixed waste body are not interchangeable parts. Do not loosen the connection holding the trap to the shower tray as a cleaning experiment.

Report the change without repeatedly flooding the tray

Keep the removed parts together and photograph them if their correct position is uncertain. Mention whether the insert sits unevenly, the cover will not settle or an O-ring is visibly distorted. Do not force a similar-looking replacement into the opening. The model and version determine the correct insert, so the outside cover alone may not identify it. If water rises towards the tray edge or a leak is visible beneath the tray, stop use and arrange assessment. Explain that the change followed cleaning so the inspection includes correct reassembly before assuming a blockage farther along the drainage route.

Useful observations

  • Keep the grid, dip tube and any loose seal together.
  • Compare their refitting with the exact trap instructions.

Details to include in your enquiry

  • Which parts were removed immediately before the behaviour changed?
  • Does the insert sit correctly, and was an O-ring left loose or damaged?

An assessment establishes the appropriate work. Leave fixed fittings and concealed connections in place, and do not reproduce an unsafe symptom.

Further information

Your model’s instructions take precedence over general guidance.