General guidance · Plumbing

Confirm which guidance applies to the installation

Mira’s mixer-shower guidance for insufficient heat is expressly aimed at high-pressure systems. Establish the shower model and known supply type before applying it to a gravity-fed installation. Describe whether nearby hot taps still behave normally, whether the shower has always been lukewarm or whether it changed recently. Note any accompanying loss of flow. The manufacturer includes the showerhead, hose and model-appropriate regulating arrangement among the items considered during assessment, so the temperature symptom alone is not enough to order a replacement mixing cartridge.

Record changes without bypassing temperature controls

Tell the installer if the shower, hose, head or hot-water system was changed before the problem began. Include the selected outlet on a dual shower and whether both outlets are affected. Do not defeat a temperature stop, remove an unidentified regulator or alter a boiler or cylinder setting to make the shower hotter. Ask for the supply and correct model instructions to be checked together. If the water sometimes becomes excessively hot as well as lukewarm, describe that instability separately and avoid further use until the cause has been assessed.

Useful observations

  • Confirm the supply type from records or the installer.
  • List any recently replaced shower outlet accessories.

Details to include in your enquiry

  • Is the shower consistently lukewarm or does its temperature swing?
  • Are other hot-water outlets affected?

An assessment establishes the appropriate work. Leave fixed fittings and concealed connections in place, and do not reproduce an unsafe symptom.

Further information

Your model’s instructions take precedence over general guidance.