General guidance · Plumbing

Identify the dry-sealing device before changing the pipework

Wavin describes HepvO as a self-sealing waste valve that uses a membrane rather than retained water to form its seal. Its slim in-line shape can therefore look different from a conventional U-bend or bottle trap. The absence of a visible water pocket does not by itself mean that a trap has been omitted. Look for the product marking on the accessible body and keep a photograph of the whole pipe arrangement. Do not force a rod or tool through an unidentified valve while trying to find an obstruction.

Report symptoms and the fitted orientation together

HepvO can be fitted vertically or horizontally, but its instructions specify flow direction and an underside orientation for the arrows when horizontal. Photograph visible markings rather than twisting a connected fitting to inspect them. If an odour or drainage problem began after a cupboard alteration or waste replacement, include that history. A correct product identity helps the plumber assess the valve, installation and connected drain together. It does not prove that the membrane is the cause of every smell. Ask for the relevant model instructions to be used before replacing a dry valve with a different style of trap.

Useful observations

  • Photograph the fitting’s brand and any visible direction arrows.
  • Describe the complete route without moving connected pipework.

Details to include in your enquiry

  • Is the body marked HepvO or another self-sealing waste product?
  • Did the odour or slow drainage begin after work on the waste pipe?

An assessment establishes the appropriate work. Leave fixed fittings and concealed connections in place, and do not reproduce an unsafe symptom.

Further information

Your model’s instructions take precedence over general guidance.