Record the warning and its timing
Triton’s guidance for a low-pressure indication calls for checking the water supply, isolation valves and inlet filter against the model’s minimum pressure and flow requirements. Internal filter access belongs with a suitably qualified person; do not take the shower cover off to investigate. Note the exact wording or light, whether it appears immediately or during use, and any simultaneous loss at ordinary taps. If water stops during use, stop the shower and follow its instructions for safe isolation. Do not keep restarting it in an attempt to clear the warning.
Describe the supply conditions before choosing a part
Mention recent plumbing work, a supplier interruption or whether the warning coincides with another outlet being used. A tap that still produces some water does not confirm that the shower receives its required supply while running. The assessment may need measurements at the shower, rather than an estimate based on the kitchen tap. Keep the full model and power rating ready, since requirements can vary. Do not buy a pressure switch, heater or booster pump solely because the warning contains the word pressure. Establish the available supply and any restriction before deciding which repair is justified.
Useful observations
- Record the exact warning and when it appears.
- Leave inlet-filter and internal checks to an appropriate professional.
Details to include in your enquiry
- Does the warning coincide with another water outlet being used?
- Has the water supply or shower installation recently changed?
An assessment establishes the appropriate work. Leave fixed fittings and concealed connections in place, and do not reproduce an unsafe symptom.
Further information
Your model’s instructions take precedence over general guidance.