Record the stage and the installation history
AEG advises checking recent installation when an integrated dishwasher's door shifts, including whether the furniture panel and fitting are appropriate. Its guidance also identifies blocked spray arms as a possible consideration on an otherwise correctly installed appliance. Note whether the movement happens while water is circulating or only during the normal drying sequence.
Do not restrain the door to continue washing
Stop the programme if the door moves abnormally or water escapes. With the machine safely isolated and cool, carry out only the accessible spray-arm and filter checks described in the owner's manual. Do not add weights, tighten unseen hinges or hold the door down during operation. A recent fitting problem belongs with the installer; unexplained movement on an established installation needs an engineer's assessment with the model and furniture-door details.
Useful observations
- Record recent changes to the furniture panel or plinth.
- Note the programme stage when movement begins.
Details to include in your enquiry
- Is this an integrated machine with a newly fitted door panel?
- Does the door move during active washing or at the intended end-of-cycle opening?
An inspection confirms the fault. Do not dismantle the appliance or reproduce an unsafe symptom to answer a question.
Further information
Your model’s instructions take precedence over general guidance.