A warning about level control
AEG groups these codes with a possible pressure-sensing or water-level-control issue. Its owner guidance includes checking the filters and sump for debris or excess foam before a controlled restart. The code alone does not prove that the pressure sensor itself needs replacement. Photograph the warning because a spoken description of several beeps is easy to confuse with another group.
Keep the inspection within owner access
With the machine safely isolated and cool, inspect only the filter and visible sump areas identified in its manual. Watch for sharp fragments and do not reach into hidden openings. AEG specifies an approximately five-minute power interruption for this family; use an accessible plug or normal isolator. If the same warning returns after the permitted cleaning and restart, stop repeated trials and report when in the programme it occurred.
Useful observations
- Record any unusual foam before removing it.
- Refit the filter correctly before a permitted test cycle.
Details to include in your enquiry
- Does the warning appear during filling, washing or draining?
- Did it begin after a detergent spill or change?
An inspection confirms the fault. Do not dismantle the appliance or reproduce an unsafe symptom to answer a question.
Further information
Your model’s instructions take precedence over general guidance.