Distinguish the two reports
AEG groups i60, i61, i69 and i6C with water-temperature problems and includes an overly hot supply among the possibilities. Its i70 guidance concerns a temperature-sensing defect detected in the sump. Record the exact code, whether the machine uses a hot or cold feed and any recent plumbing change. These observations help an engineer check the right operating conditions.
Use only the published owner checks
AEG's guidance includes inspecting accessible filters and the sump for debris or excess foam with the appliance isolated. Follow the model's cleaning and restart instructions; do not test a heater, remove a sensor or open wiring covers. If the warning persists, report whether the load remained cold, the programme stopped early or drying was missing. No single one of those observations confirms which internal part has failed.
Useful observations
- Note recent changes to the water connection or hot-water system.
- Photograph the code before a permitted restart.
Details to include in your enquiry
- Was the dishwasher recently connected to a different supply?
- Did the warning occur before washing, during washing or at the drying stage?
An inspection confirms the fault. Do not dismantle the appliance or reproduce an unsafe symptom to answer a question.
Further information
Your model’s instructions take precedence over general guidance.