General guidance · Washer dryers

Check the selected stages

Look at the programme table and the display before pressing start. Some machines have separate cotton and synthetic drying positions; others change between washing, drying and combined operation with a mode control. Confirm which stage indicators should appear. Do not assume that pressing a drying option automatically removes the washing stage.

Prepare a suitable clean load

Check that the garments permit machine drying and have been washed and adequately spun. Do not add detergent for a drying-only cycle. Keep the water supply available if the manual requires it during drying. If the control sequence is unclear, record the full model identifier and chosen programme instead of experimenting with several starts and cancellations.

Useful observations

  • Confirm the display shows the intended drying-only stages.
  • Check the fabric programme and permitted drying load.

Details to include in your enquiry

  • Does the dial have a separate drying position?
  • Which washing and drying indicators are illuminated before starting?

An inspection confirms the fault. Do not dismantle the appliance or reproduce an unsafe symptom to answer a question.

Further information

Your model’s instructions take precedence over general guidance.