General guidance · Tumble dryers

Follow the filter arrangement for this model

Beko distinguishes single-part filters from two-part combined filters. If the manual shows two components, identify both before deciding that filter maintenance is complete. The pieces need to be opened, cleaned and returned in the stated order. Do not infer that a second layer is disposable packaging or an optional accessory simply because the machine can physically close with it missing.

Check condition as well as visible fluff

Inspect the accessible mesh and seating surfaces under good light once the machine is cool. A folded edge, trapped wad of lint or damaged hinge may prevent correct seating even when the screen looks clean. Any washed component must be dry before refitting where the manufacturer requires this. If a part no longer stays in place, identify it by the model number rather than trying tape, adhesive or a filter from a similar-looking dryer.

Useful observations

  • Compare the complete filter with the manual illustration.
  • Check both parts are dry and seated in their intended order.

Details to include in your enquiry

  • Does your manual show one filter component or two?
  • Is either part cracked or unable to close properly?

An inspection confirms the fault. Do not dismantle the appliance or reproduce an unsafe symptom to answer a question.

Further information

Your model’s instructions take precedence over general guidance.