General guidance · Plumbing

Record the conditions as well as the numbers

Before interpreting a changing reading, identify the correct meter and note whether toilets, appliances, irrigation or other equipment could still take water automatically. Use only a safely accessible meter; do not enter a chamber or lift an unsafe cover. Thames Water publishes a test using its internal stop-valve procedure to investigate the pipe between the meter and that valve. That is a specific isolation test, not the same as simply leaving taps unused. Keep the start and finish times with clear photographs of both readings.

Do not treat one result as a complete leak diagnosis

A change under the supplier’s stated test conditions needs follow-up, while an unchanged isolated-supply reading does not assess every pipe beyond the closed valve. Tell the supplier or plumber exactly which control was operated and whether it is known to isolate fully. Mention a shared supply, recent meter replacement or unusual consumption pattern. Avoid repeated valve operation if the control is stiff or leaking. The next step is to establish where water is being used or lost before deciding whether the work concerns a toilet, internal plumbing or an underground supply route.

Useful observations

  • Keep readings, times and the exact test conditions together.
  • Account for automatic water use and possible shared supplies.

Details to include in your enquiry

  • Was the internal stop valve closed, or were taps merely unused?
  • Which parts of the system did that test actually isolate?

An assessment establishes the appropriate work. Leave fixed fittings and concealed connections in place, and do not reproduce an unsafe symptom.

Further information

Your model’s instructions take precedence over general guidance.