Distinguish detection from the valve in the supply pipe
GROHE’s Sense user guide distinguishes the Sense sensor, which detects water at its location, from Sense Guard, a controller installed in the mains water pipe. The Guard contains the shut-off function; the separate sensor can trigger it when the appropriate linked arrangement is configured. Having a sensor under a sink does not by itself establish that a water valve is installed or has closed. If an alert occurs, check the actual situation safely and use the known manual isolation route when needed. Do not treat a phone notification as confirmation that a leak has stopped.
Check what the installed system is set up to do
Record which device raised the alert, whether the app reports a valve closure and whether water is still escaping. For setup or maintenance, consult the current instructions for those exact devices and review their connection and notification status. A sensor monitors its own position, so its placement also matters; moving it away from a repeated wet patch does not resolve the cause. Ask the installer to explain the installed coverage and manual shut-off route. Keep leak investigation separate from app troubleshooting whenever there is visible water requiring attention.
Useful observations
- Identify whether there is a Sense sensor, a Sense Guard or both.
- Check the physical leak and known isolation route, not only the notification.
Details to include in your enquiry
- Which device produced the alert?
- Is a water controller actually installed in the incoming supply pipe?
An assessment establishes the appropriate work. Leave fixed fittings and concealed connections in place, and do not reproduce an unsafe symptom.
Further information
Your model’s instructions take precedence over general guidance.