General guidance · Plumbing

Stop changing the surface while recording it

If a tap becomes dull, patchy or discoloured after cleaning, retain the product name and photograph the appearance in ordinary light. Say whether the mark is a raised deposit, a streak or a change to the finish itself; you do not need to decide which it is before asking for advice. Bristan recommends mild pH-neutral soap and a soft cloth for its finishes and warns against harsh cleaners and abrasives. This does not establish that every mark is chemical damage, but it means that escalating to stronger products is an unsuitable way to test the surface.

Identify the finish before choosing a remedy

Chrome, coloured and other specialist finishes should be checked against their own care instructions. Include the tap range, finish description, approximate installation date and the cleaner contact time if known. Do not mix products, scrape the mark or use an abrasive pad to see whether it comes off. Ask whether the surface can be cleaned appropriately or whether it needs a manufacturer assessment. Keep a surface complaint separate from an active leak: if the tap also drips or water enters the cupboard, describe that as a second issue.

Useful observations

  • Keep the cleaner packaging or its exact name.
  • Photograph the mark before applying another treatment.

Details to include in your enquiry

  • Which finish and cleaning product are involved?
  • Is there also a leak or only a visible surface change?

An assessment establishes the appropriate work. Leave fixed fittings and concealed connections in place, and do not reproduce an unsafe symptom.

Further information

Your model’s instructions take precedence over general guidance.