General guidance · Plumbing

Deal with the hose and exposed fittings before frost

WaterSafe advises disconnecting, draining and storing garden hoses before cold weather, alongside protecting exposed taps and pipework. Where an outside supply can be isolated and drained appropriately, that also helps reduce frost damage. Start by identifying the valve serving the garden tap while the installation is accessible and working normally. Do not assume that a nearby handle controls only the outside branch. If the valve is seized, unlabelled or shared with other services, ask for it to be identified and assessed rather than forcing it or leaving an uncertain arrangement.

Include the pipe route in the preparation

A tap cover addresses the fitting itself; note any exposed pipe leading to it through a garage, outbuilding or unheated space. WaterSafe also recommends insulation for vulnerable pipework and attention to dripping taps. Tell the plumber if the outside tap cannot be isolated, leaks continuously or feeds equipment that must remain supplied. These details determine a suitable winter plan. Keep the route and valve accessible after putting summer equipment away. If the supply is already frozen, treat that as a separate fault: do not force the tap or use a flame, and arrange help if damage or a leak is suspected.

Useful observations

  • Disconnect and drain the hose before cold weather.
  • Identify the outside branch valve and exposed pipe route.

Details to include in your enquiry

  • Can the garden tap be isolated independently and safely?
  • Are pipes exposed in a garage, outbuilding or external wall run?

An assessment establishes the appropriate work. Leave fixed fittings and concealed connections in place, and do not reproduce an unsafe symptom.

Further information

Your model’s instructions take precedence over general guidance.