General guidance · Plumbing

Recognise the remote control arrangement

Surestop explains that its water switch operates through pressure differences within the valve and does not require an electricity supply. On a remote version, small twin-bore tubing connects the switch to the valve. If operation has changed, looking for a battery is therefore the wrong starting point. The manufacturer’s troubleshooting highlights kinked or pinched tubing, including where it passes cupboard shelves and doors. Look at the visible route without disconnecting it, and note any recent cupboard work or stored object pressing against the tubing. Do not cut or pull it free.

Make sure the household has a dependable isolation route

Report whether neither switch position works, whether operation is intermittent, or whether the local valve control behaves differently from the remote switch. If there is an active leak, use a known, safely accessible working isolation valve and arrange help rather than repeatedly relying on a switch that has not stopped the water. For a planned repair, identify where the existing traditional stop tap is located. Surestop recommends installation alongside that valve. The installer can assess tubing, allowed route length and the fitted valve together. An apparently tidy cupboard installation still needs accessible, reliable controls.

Useful observations

  • Look for visible kinks or cupboard contents pinching the remote tubing.
  • Identify a known working isolation route without disconnecting the switch.

Details to include in your enquiry

  • Did operation change after cupboard work or storage was moved?
  • Does the valve’s local control behave differently from the remote switch?

An assessment establishes the appropriate work. Leave fixed fittings and concealed connections in place, and do not reproduce an unsafe symptom.

Further information

Your model’s instructions take precedence over general guidance.