General guidance · Plumbing

Record the temperature state with the reading

Note the gauge value when the system has cooled and again during ordinary heating, without opening any equipment. Keep the units and any warning message with the record. The correct cold range comes from the actual appliance and system instructions; do not assume every dial's coloured section or another household's pressure target applies to yours.

Make repeated changes part of the report

Include recent radiator bleeding, draining, leaks or refilling already carried out. A comparison between one hot reading and one cold reading does not by itself establish a leak, but repeated loss under comparable conditions needs assessment. Avoid repeated refilling simply to hide a falling gauge or opening a bleed point to correct an unexplained high reading. Ask the appropriate professional to establish the cause, particularly if pressure changes accompany poor heating or water appearing at a discharge outlet.

Useful observations

  • Record whether each pressure reading was taken hot or cold.
  • Use the installed system's documented range and retain any warning message.

Details to include in your enquiry

  • Does pressure repeatedly fall when compared under the same conditions?
  • Has water recently been released, replaced or seen leaking?

An assessment establishes the appropriate work. Leave fixed fittings and concealed connections in place, and do not reproduce an unsafe symptom.

Further information

Your model’s instructions take precedence over general guidance.