Identify the ordinary control arrangement
Drayton's householder guidance says the radiator in the room containing the main thermostat should normally have no TRV; where a conventional TRV is present, its guidance is to leave it at maximum and use the room thermostat. This avoids the radiator shutting down before that room satisfies the main control. Check the actual system instructions before applying this arrangement to smart zoning, which can operate differently.
Keep the enquiry about competing controls
Record the wall thermostat target, the valve position and whether the rest of the house continues warming while that room remains below target. These observations help explain a possible control conflict without proving a hardware fault. Do not alter lockshield settings, bypass arrangements or wiring to make the controls agree. If the system was recently converted to smart room control, ask the installer to confirm the intended reference room and sensor arrangement.
Useful observations
- Identify whether the radiator head is conventional or part of a smart zoning system.
- Compare the valve setting with the main room thermostat's target.
Details to include in your enquiry
- Are the two controls trying to maintain different temperatures in the same room?
- Has the control arrangement recently been changed?
An assessment establishes the appropriate work. Leave fixed fittings and concealed connections in place, and do not reproduce an unsafe symptom.
Further information
Your model’s instructions take precedence over general guidance.