General guidance · Plumbing

Identify the channel that was changed

Check the hot-water and central-heating labels and their current indications. The documented programmer has a separate Advance/Boost control for each channel. Use the intended channel's normal owner control rather than assuming any lit on indicator applies to the whole system. Also note that a satisfied cylinder thermostat can stop water heating even while the programmer makes that channel available.

Keep the installed system arrangement in the enquiry

Independent timing depends on the actual system and programmer configuration. Some older arrangements link heating and hot water, so do not change concealed configuration links to imitate a different installation. If the correct heating channel requests heat but the radiators remain cold, record that separately from whether stored water warms. Include whether there is a hot-water cylinder and the exact programmer model; a combination boiler may have a different hot-water control arrangement altogether.

Useful observations

  • Check which labelled channel received the boost request.
  • Identify whether the system has stored hot water and independent channel control.

Details to include in your enquiry

  • Is the illuminated indication for hot water or central heating?
  • Has the system previously allowed those channels to operate independently?

An assessment establishes the appropriate work. Leave fixed fittings and concealed connections in place, and do not reproduce an unsafe symptom.

Further information

Your model’s instructions take precedence over general guidance.