General guidance · Plumbing

Read the active smart mode

Wiser describes Comfort Mode as learning warm-up behaviour and starting early, while Eco Mode uses cooling behaviour to stop heating ahead of the scheduled end. Check whether either feature is enabled before changing the clock or replacing a thermostat. The important observation is whether the room is comfortable at the intended time, not merely whether heat starts at the printed schedule boundary.

Separate prediction from a timing error

Record the scheduled target, the actual room reading and the start or stop time over ordinary use. A consistent one-hour shift in every event suggests a different question from a varying warm-up period on cold mornings. If the room repeatedly misses its target, include recent changes such as altered schedules, open doors or building work. Use the documented owner setting to review the smart mode; do not change installer parameters to make every heating cycle resemble a simple timer.

Useful observations

  • Check whether predictive comfort or economy modes are active.
  • Compare room comfort at the scheduled time with the actual start time.

Details to include in your enquiry

  • Is the controller aiming to reach a temperature by that time?
  • Does the timing vary with conditions, or is the whole schedule shifted?

An assessment establishes the appropriate work. Leave fixed fittings and concealed connections in place, and do not reproduce an unsafe symptom.

Further information

Your model’s instructions take precedence over general guidance.