General guidance · Electric ovens

Check the active target

The screen may show both cavity temperature and food temperature. Confusing them can produce an unexpected stop. The probe must also be positioned as the manual describes; contact with a bone, dish or unsuitable part of the food can give a reading that does not represent the centre you intended to measure.

Record the sequence

Note the target core temperature, displayed reading at the stop and any completion message. Do not assume the remaining timer proves a fault. If the indicated temperature jumps abruptly or the programme stops while the probe connection warning is showing, stop relying on that sensor result and follow the food's proper cooking checks. Use only the compatible probe specified for the oven.

Useful observations

  • Read the core-temperature target rather than the cavity setting.
  • Review the probe placement illustration in the manual.

Details to include in your enquiry

  • Did a target-reached message appear?
  • Was the probe touching the cooking vessel?

An inspection confirms the fault. Do not dismantle the appliance or reproduce an unsafe symptom to answer a question.

Further information

Your model’s instructions take precedence over general guidance.