Compare standby with normal operation
Check whether the ordinary controls and movement response work after the oven is switched on normally. Miele explains that the QuickTouch Off setting disables the relevant sensor controls and movement sensor while the oven is off. If standby response is wanted, use the documented QuickTouch setting for that model. This setting does not establish that every unresponsive control or entirely blank appliance has the same cause.
Keep a fault report tied to the operating state
Record whether the problem occurs only in standby, throughout cooking, or after a particular settings change. If QuickTouch is enabled but the expected response is still missing, note what the sensor is configured to do and whether manual controls remain usable. Avoid repeated hand movements over a hot open cavity as a test. Checking the menu and the normal switch-on response provides a clearer account than assuming the movement sensor has failed because an energy-saving standby state is quiet.
Useful observations
- Check the model's QuickTouch setting.
- Compare standby behaviour with normal switched-on controls.
Details to include in your enquiry
- Is the sensor inactive only while the oven is off?
- Did the behaviour follow a settings change?
An inspection confirms the fault. Do not dismantle the appliance or reproduce an unsafe symptom to answer a question.
Further information
Your model’s instructions take precedence over general guidance.