Distinguish a measurement from an impression
Saniflo specifies 1.7 bar dynamic incoming pressure for Sanicompact: the pressure while water is flowing. A strong-looking basin tap or a static gauge reading is not the same measurement. Give the installer or engineer any actual test result and say how it was obtained. Do not adjust pressure controls or disconnect a supply merely to investigate this yourself.
Record changes in the household supply
Useful history includes recent stop-tap work, a supply interruption, a new pressure-control device or a change that began when another outlet was fitted. Mention whether the flush has always been weak or previously worked properly. Ask for the supply and the appliance to be considered together before a part is ordered. If the bowl is not clearing, keep the toilet unused while the problem is assessed; pressure testing is not a reason to repeat an unsuccessful flush.
Useful observations
- Keep any installer pressure-test record with the model details.
- Describe when the flushing performance changed.
Details to include in your enquiry
- Was the recorded pressure static or measured under flow?
- Has any water-supply work taken place recently?
An inspection confirms the fault. Do not dismantle the appliance or reproduce an unsafe symptom to answer a question.
Further information
Your model’s instructions take precedence over general guidance.