General guidance · Saniflo & macerators

Recognise the intended layout

Saniflo describes a Sanifloor+ installation with the pump up to 300 mm above the gully and up to 3 metres away horizontally. Those figures identify a particular system, not a general rule for other waste pumps. An above-floor pump is therefore not automatically evidence of a mistake. Preserve the installed layout until the exact generation and its instructions have been established.

Provide the route without taking it apart

For an existing drainage problem, describe where the pump is relative to the shower and which parts of the route are visible. Include any change to a cupboard, wall or floor that may have disturbed that route. Do not disconnect a hose to measure it or move the pump to an apparently lower position. The engineer needs to assess the inlet arrangement, activation and discharge together; changing one part without that assessment can obscure the original fault.

Useful observations

  • Use existing plans or safely visible measurements only.
  • Mention any relocated pump or altered pipe route.

Details to include in your enquiry

  • Has the layout changed since the shower last drained normally?
  • Which sections of the route are concealed?

An inspection confirms the fault. Do not dismantle the appliance or reproduce an unsafe symptom to answer a question.

Further information

Your model’s instructions take precedence over general guidance.