General guidance · Electric hobs

Inspect the cooled contact surfaces

Switch the hob off and remove the knob using its ordinary procedure. Check the glass and underside in good light without scraping either surface. Clean with the materials permitted for the control; do not use a metal brush or blade to remove a suspected particle. Dry the parts before correct replacement.

Review how the control is handled

A knob stored on a workshop surface, near metal fragments or against an unsuitable object can collect debris before returning to the kitchen. Keep it in a clean location. If a mark looks like a crack rather than a surface scratch, stop using the hob and arrange assessment instead of rubbing harder. Photograph the marks and their location. A clear record of damage around the knob helps distinguish accessory contact from impact damage elsewhere on the cooking surface.

Useful observations

  • Inspect and clean the control underside using its approved method.
  • Keep the accessory away from loose metal debris.

Details to include in your enquiry

  • Are the marks concentrated around the knob position?
  • Was the knob recently stored on a different surface?

An inspection confirms the fault. Do not dismantle the appliance or reproduce an unsafe symptom to answer a question.

Further information

Your model’s instructions take precedence over general guidance.