Reconstruct what happened before the flashing
Check whether a power cut, an isolator operation or a settings visit immediately preceded the display. This history helps distinguish a known display state from an unexplained recurring event. A flashing indication does not measure the glass temperature for your hand: keep treating recently used areas as hot and allow them to cool naturally. Do not touch a zone to decide whether its display is accurate.
Report a pattern that does not fit
Use the model manual for the normal return from programming or restoration after an interruption. Avoid repeatedly switching the supply off merely to remove the indication, because that changes the very history you are trying to understand. If the indicators flash from a fully cold start without either trigger, or another message appears, record that separately. Include which zones were recently used and whether the household supply had actually failed.
Useful observations
- Note any recent outage or settings change.
- Keep clear of recently heated glass.
Details to include in your enquiry
- Was residual heat present when power was interrupted?
- Does the behaviour recur from cold?
An inspection confirms the fault. Do not dismantle the appliance or reproduce an unsafe symptom to answer a question.
Further information
Your model’s instructions take precedence over general guidance.