Clean the accessory using its own method
Remove the cooled sensor from the cookware and consult its cleaning instructions. Use the permitted soft cleaning materials; rough pads and hard scraping tools can damage a small optical surface. Do not assume hob cleaner is suitable for the accessory, and do not spray liquid into its housing. Dry the relevant surfaces before reattaching it as instructed.
Keep a useful before-and-after record
Note whether the problem began after a splattering meal and whether the sensor showed a warning, lost connection or simply gave an unexpected cooking result. Cleaning is routine care, not proof that every sensor symptom comes from dirt. If correct cleaning leaves the same issue, record the exact message and sensor model. Avoid touching the cleaned window repeatedly while trying to reposition the accessory, because this can put fresh contamination on the surface you have just prepared.
Useful observations
- Inspect the cooled sensor's window without scratching it.
- Use only its specified cleaning method.
Details to include in your enquiry
- Did the problem follow a greasy spill?
- Is a warning still present after approved cleaning?
An inspection confirms the fault. Do not dismantle the appliance or reproduce an unsafe symptom to answer a question.
Further information
Your model’s instructions take precedence over general guidance.