Look at the measuring depth
AEG instructs owners to insert the sensor at least to its marked minimum; its liquid guidance gives an additional immersion range above that mark. Use your model instructions to check the actual liquid level around the sensor, not simply the total amount poured into a wide pan. A tilted pot or a sensor resting at an angle can make the visible arrangement misleading.
Choose a suitable cooking setup
Use a compatible vessel that supports the instructed sensor position and the recipe's quantity. Do not add water to food merely to silence a warning if that changes the method unsafely. When a sensor reading seems erratic, note the vessel size, liquid depth and whether the sensor is touching food or liquid as intended. Correct immersion does not prove calibration is right, but it removes one separate reason why an apparently stable display might not represent the contents properly.
Useful observations
- Check the marked immersion depth with cooking safely paused.
- Match the vessel to the sensor arrangement and recipe.
Details to include in your enquiry
- Is the sensor immersed throughout the cook?
- Did the issue begin with a wider or shallower pan?
An inspection confirms the fault. Do not dismantle the appliance or reproduce an unsafe symptom to answer a question.
Further information
Your model’s instructions take precedence over general guidance.