General guidance · Electric hobs

Plan the movement before lifting

Decide where one pan will go and keep that destination within the usable surface, with adequate separation. Use safe handling for the pan's weight and temperature. Watch which numerical display responds, then check its selected power before moving another item. This is particularly useful when several vessels have similar sizes but need very different heat levels.

Verify the meal after rearranging

Do not assume that every countdown or setting must remain attached to the correct pan merely because heating continues. The manual describes circumstances in which a switch-off time is deleted after repositioning and a power change. Read back the active timers as well as the power. If the display cannot identify a vessel, follow the model's recognition guidance. A report stating which pan moved and which control flashed is far more useful than describing the entire surface as confused.

Useful observations

  • Move one vessel and verify its control before moving another.
  • Check any associated switch-off timer after rearrangement.

Details to include in your enquiry

  • Were several pans moved together?
  • Which display changed when the affected pan moved?

An inspection confirms the fault. Do not dismantle the appliance or reproduce an unsafe symptom to answer a question.

Further information

Your model’s instructions take precedence over general guidance.