General guidance · Electric hobs

Recreate the prescribed starting conditions

Read the calibration instructions for your exact SensePro model. AEG's published example uses the front-left zone, an 180 mm base pan and 1–1.5 litres of cold, unsalted water, with the sensor immersed to its minimum mark. Enter the calibration function and follow its screen prompts; ordinary boiling mode does not perform the same job. Do not add ingredients or repeatedly top up the pan during the procedure.

Keep the outcome useful

Record whether calibration never starts, stops with a message or completes but cooking readings still seem implausible. Those are different observations. The sensor also needs calibration after replacement or a relevant change of altitude. Repeating calibration with different arbitrary amounts of water makes the results harder to compare. If the correct arrangement repeatedly fails, retain the displayed message and sensor identification for advice rather than trying hidden settings.

Useful observations

  • Use the model's calibration menu and prescribed cold-water setup.
  • Photograph an unsuccessful completion message.

Details to include in your enquiry

  • Has this sensor ever calibrated successfully?
  • Was the sensor replaced recently?

An inspection confirms the fault. Do not dismantle the appliance or reproduce an unsafe symptom to answer a question.

Further information

Your model’s instructions take precedence over general guidance.