General guidance · Dishwashers

Observe one complete wake-up

Miele explains that its relevant electronics need a few seconds to restart after standby. Pressing On/Off may produce the Miele logo or a rolling zero during that period; waking the machine by moving the door may leave the display dark initially. Let one wake-up sequence finish before selecting a programme.

Distinguish a pause from a persistent fault

Write down whether normal controls return after a few seconds, or whether the machine remains unresponsive. A persistent blank panel, repeated rebooting or a programme that never becomes selectable is a different complaint. Photograph any symbol that stays on screen. Avoid rapid power cycling as a substitute for diagnosis; it may repeatedly restart the same initialisation period without resolving the underlying issue.

Useful observations

  • Time the delay from one deliberate control press.
  • Check whether the behaviour only follows a long idle period.

Details to include in your enquiry

  • Does the display become fully usable after startup?
  • Is the delay new, longer than before or accompanied by another warning?

An inspection confirms the fault. Do not dismantle the appliance or reproduce an unsafe symptom to answer a question.

Further information

Your model’s instructions take precedence over general guidance.