Check a stored setting first
In the cited HG07-W manual, this option adds an interim rinse and remains selected until switched off, with programme exceptions. Record whether it was enabled for a particular load and then forgotten. A longer or more water-intensive sequence may reflect that stored choice rather than a failed sensor.
Decide whether it is still needed
Compare the reason for selecting it with current results and the model's programme guidance. If the extra rinse is no longer wanted, change only this setting and observe a normal comparable wash. Do not reset water-hardness or rinse-aid controls at the same time. If a consumption or residue problem remains, retain before-and-after settings and describe it independently. An additional rinse is an option, not a general treatment for every cleaning complaint.
Useful observations
- Check whether the second interim rinse remains enabled.
- Record the programme because exceptions can apply.
Details to include in your enquiry
- Was the option originally chosen for one unusual load?
- Does the concern remain after returning to the intended setting?
An inspection confirms the fault. Do not dismantle the appliance or reproduce an unsafe symptom to answer a question.
Further information
Your model’s instructions take precedence over general guidance.