General guidance · Dishwashers

Check the optical path first

The SMD6ZCX60G manual states that TimeLight projects programme information below the door. It also explains that a forward-positioned base panel, or certain flush eye-level installations, can make that information invisible. If the change began after a plinth was refitted, a new floor covering was laid or cabinetry was altered, photograph the lower front before assuming the display electronics have failed.

Separate a setting from an obstruction

Check the model's TimeLight setting, which can deliberately turn the projection off. Confirm the machine is actually in a stage that should display information. Do not remove electrical covers or cut a plinth on speculation. A useful enquiry includes the installation height, a side view of the plinth, whether the floor display previously worked and whether the dishwasher otherwise completes its programme.

Useful observations

  • Observe the floor while a programme is running.
  • Check the TimeLight setting and any recent cabinet changes.

Details to include in your enquiry

  • Did the projection disappear immediately after building or flooring work?
  • Is the appliance installed at floor level or higher in a cabinet?

An inspection confirms the fault. Do not dismantle the appliance or reproduce an unsafe symptom to answer a question.

Further information

Your model’s instructions take precedence over general guidance.