General guidance · Dishwashers

An occasional scheduled process

The SMD6ZCX60G manual explains that its water softening system regenerates periodically and that this increases running time, water and electricity consumption. The process occurs before the end of the main rinse. Consequently, one cycle's duration or meter reading need not match the next exactly. This is useful context when the appliance otherwise finishes normally and cleaning results remain consistent.

Look for a pattern before altering settings

Record several completed cycles with the selected programme, options and displayed starting estimate. Do not lower the water-hardness setting simply to suppress regeneration: it must correspond to the incoming water. A machine that repeatedly stalls, leaves water behind or reports a fault needs a separate assessment. For an enquiry, distinguish a modest occasional increase from a programme that never reaches its end, and include whether the water supply or softener settings recently changed.

Useful observations

  • Check the household water hardness against the stored setting.
  • Log completed cycles rather than timing one isolated wash.

Details to include in your enquiry

  • Does the extra time occur occasionally or on every cycle?
  • Does the machine finish with clean dishes and no warning?

An inspection confirms the fault. Do not dismantle the appliance or reproduce an unsafe symptom to answer a question.

Further information

Your model’s instructions take precedence over general guidance.