Support the basket during adjustment
The SMD6ZCX60G manual describes a basket adjusted by levers on both outer sides. The basket must be held by its upper edge so it cannot fall suddenly when the levers are released. Set both sides to the same level and allow the mechanism to engage. A basket with mismatched sides can appear twisted even when the cabinet itself has not moved.
Recheck the space above and below
Empty fragile or heavy items before correcting the position, then slide the basket gently in and out. Check that its height suits the plates below and the glasses above; raising it solves one clearance problem by reducing another space. If either latch fails to hold, a wheel is missing or the basket still tilts at matching settings, stop loading that basket and photograph the affected support for a parts enquiry.
Useful observations
- Compare the left and right adjustment positions.
- Check free spray-arm movement after the basket is seated.
Details to include in your enquiry
- Did the tilt begin immediately after changing basket height?
- Does one side drop again without touching its lever?
An inspection confirms the fault. Do not dismantle the appliance or reproduce an unsafe symptom to answer a question.
Further information
Your model’s instructions take precedence over general guidance.