General guidance · Dishwashers

Verify the installed supply

The manual specifies a minimum hot-water supply condition for this programme. Ask the installer to confirm the arrangement if it is unknown; do not change pipework to experiment. Record whether SolarSave was chosen because it sounded economical or because the installation was specifically designed for it.

Use a programme that matches the installation

Until compatibility is confirmed, follow the normal programme guidance for the connected model. Poor cleaning on an unsuitable SolarSave setup does not by itself prove a heating fault. If the programme previously worked and results changed, report any hot-water-system or plumbing changes as well as dishwasher symptoms. The energy source and actual supply conditions matter when assessing the feature's benefit, so avoid assuming its label guarantees lower household cost.

Useful observations

  • Check the model's SolarSave inlet requirements.
  • Confirm supply compatibility through installation information.

Details to include in your enquiry

  • Was SolarSave commissioned for this installation?
  • Did the problem follow changes to the household hot-water system?

An inspection confirms the fault. Do not dismantle the appliance or reproduce an unsafe symptom to answer a question.

Further information

Your model’s instructions take precedence over general guidance.