General guidance · Dishwashers

Match the assembly to the complaint

On the SMD6ZCX60G, Extra Clean Zone adds targeted washing in the upper basket and has an ON/OFF slider. Bosch explains that deposits can block its nozzles. Check the slider and compare results within that zone with items elsewhere. This helps distinguish a local obstruction from a whole-basket water-supply problem; switching the feature on also increases consumption.

Clean and refit the complete part

Follow the illustrated removal sequence for this model after the cycle has finished and the contents have cooled. The assembly releases using its tab and is cleaned under running water with the slider in the specified position. Refit it in the correct mounts until it clicks into place. Bosch says the appliance must always operate with the assembly fitted. A broken latch, split body or part that will not seat needs the correct replacement, rather than a wash with the assembly removed.

Useful observations

  • Check the slider position before changing programmes.
  • Inspect the cleaned part's mounts and latch without forcing them.

Details to include in your enquiry

  • Are only items over Extra Clean Zone affected?
  • Does the assembly click securely back into its basket mounts?

An inspection confirms the fault. Do not dismantle the appliance or reproduce an unsafe symptom to answer a question.

Further information

Your model’s instructions take precedence over general guidance.