The setting changes automatic decisions
The SMD6ZCX60G manual lists three sensor settings. They alter how the automatic programme responds to soiling, with different allowances for difficult conditions or detergents with lower levels of active ingredients. This is separate from selecting a hotter fixed programme. Bosch identifies the default as suitable for mixed loads and normally substantial soiling, so the most sensitive setting is not automatically the best everyday choice.
Change one variable at a time
Record the existing setting before adjusting it through the model's menu. Keep a comparable load and detergent for the next observation, otherwise a better result cannot be attributed confidently. Additional programme intensity can change water and energy use. If one rack is consistently dirty, inspect its normal water access and spray clearance first; sensitivity settings cannot establish whether a particular component has failed.
Useful observations
- Note the sensor setting, detergent type and Auto programme used.
- Compare a similar load after one deliberate adjustment.
Details to include in your enquiry
- Did poor results start with a detergent change?
- Is the whole load affected or only one location in a basket?
An inspection confirms the fault. Do not dismantle the appliance or reproduce an unsafe symptom to answer a question.
Further information
Your model’s instructions take precedence over general guidance.