General guidance · Electric cookers

Check the intended cavity arrangement

Look at whether the manufacturer-supplied divider is in place and compare the accessories with the divided-oven diagram. A cool left-hand area can be the expected consequence of this configuration. It should not be diagnosed as a failed left element merely by comparing the two sides during a small-cavity cook.

Report changes in the correct configuration

If the oven is completely cool, consult the owner instructions before changing the divider arrangement. It is a substantial accessory and must be handled without scratching the door glass. If full-width cooking still heats only one side after the correct configuration is established, record the selected function and divider state. That is a different symptom from normal divided operation. Do not reach behind panels or try to hold a divider-detection mechanism in another position to make both sides heat.

Useful observations

  • Confirm whether the Energy Saving Panel is fitted.
  • Record the selected function and full or divided arrangement.

Details to include in your enquiry

  • Is the left side inactive only with the divider installed?
  • Has the configuration changed since the last successful cook?

An inspection confirms the fault. Do not dismantle the appliance or reproduce an unsafe symptom to answer a question.

Further information

Your model’s instructions take precedence over general guidance.