General guidance · Electric cookers

Identify the two controls

Use the cooker diagram to distinguish the multifunction cavity's knobs from those for the separate fan oven and grill. Select an actual heating function and the required temperature as the manual describes. A fan-only or defrost selection is different from a heated fan-cooking function, even when the symbols look related.

Record which part of the sequence fails

Observe whether the heating indicator appears, a fan starts or the cavity remains completely inactive. Check the clock or timed-programme state if the model makes that relevant. Do not rotate unfamiliar controls through every setting with food already inside. If the correct paired selections still fail, report both positions and which oven is affected. This provides a much clearer starting point than saying the thermostat is broken because turning its knob produced no heat while another required selector was still off.

Useful observations

  • Identify both function and temperature controls for the same cavity.
  • Check the selected symbol is a heating mode.

Details to include in your enquiry

  • Is the function selector still off or on fan-only?
  • Does the other oven have a different control arrangement?

An inspection confirms the fault. Do not dismantle the appliance or reproduce an unsafe symptom to answer a question.

Further information

Your model’s instructions take precedence over general guidance.