INDEPENDENT REPAIR SERVICE
Candy electric hob repairs in New Eltham
Independent Candy electric hob repair enquiries in New Eltham, SE9. Model details, symptoms and visit preparation. Call 0208 462 2111.

YOUR CANDY APPLIANCE
Start with the model and what changed.
A Candy electric hob enquiry should identify the model and product code before describing the surface as ceramic or induction. That distinction matters when a pan does not heat, a ring cycles or the controls show a warning. Tell us which positions were affected and whether a linked-area or power-management selection was already active on a model that offers it. Keep the account to what happened during normal use. The appliance should stay fitted, and a cracked surface or repeated supply trip should not be tested again.
Independent service. Manufacturer names identify the appliance; they do not imply manufacturer authorisation.
IDENTIFY THE RIGHT APPLIANCE
Model information for your Candy electric hob.
Candy manual searches accept the model name or product code. Record both when your documents show them, retaining every digit and suffix. A programme name or the appliance colour does not identify its control system; include a clear photograph of the panel without removing any fitted parts.
REPAIR PREPARATION
Useful information for this appliance.
Identify the model and the equipment fitted
Candy manual searches accept the model name or product code. Record both when your documents show them, retaining every digit and suffix. A programme name or the appliance colour does not identify its control system; include a clear photograph of the panel without removing any fitted parts. Candy offers different electric hob technologies and model-specific control features. The product reference establishes whether pan detection, additional ring selection or linked zones apply. Do not change an installation power limit or assume another Candy model has the same setting sequence.
Describe the change without repeating the fault
If a power or zone limit message appeared, preserve its wording and describe the existing use rather than trying to increase the appliance’s electrical setting. Explain whether the problem affects one zone, a pair or the whole hob, and whether the same pan previously worked there. Identify induction, radiant ceramic or solid-plate cooking from the model instructions; a glass surface alone does not tell us which it is. Keep a record of any warning already seen, the pan used and the setting selected. Pan recognition, power sharing and residual-heat indications are separate behaviours. Do not try repeated power resets, open the hob or run a damaged surface to produce a demonstration.
Prepare the installed appliance for assessment
The fitted hob should remain in place. Tell us what is immediately below it, such as a drawer, cupboard or oven, and whether an accessible isolation switch can be identified without moving anything. Clear loose worktop items after the surface has cooled, but leave installation brackets, wiring and fixed ventilation panels alone. An existing photograph of the surface and controls helps describe the layout. Cracked glass, heating that will not stop, scorching or repeated circuit trips need to be disclosed at the first enquiry; keep the affected appliance unused pending advice.
Manufacturer information and sources
Use the instructions and safety information for your complete model identifier.
- www.candy-home.com — owner and model information
- www.candy-home.com — owner and model information
- www.candy-home.com — owner and model information
- media3.bosch-home.com — owner and model information
- support.aeg.co.uk — owner and model information
- support.aeg.co.uk — owner and model information
- www.aeg.co.uk — owner and model information
- support.aeg.co.uk — owner and model information
- support.aeg.co.uk — owner and model information
- www.bosch-home.co.uk — owner and model information
- support.aeg.co.uk — owner and model information
- support.aeg.co.uk — owner and model information
- www.bosch-home.co.uk — owner and model information
- www.electricalsafetyfirst.org.uk — owner and model information
- support.aeg.co.uk — owner and model information
- support.aeg.co.uk — owner and model information
- support.aeg.co.uk — owner and model information
- support.aeg.co.uk — owner and model information
- support.aeg.co.uk — owner and model information
YOUR NEW ELTHAM ENQUIRY
Arranging the visit in New Eltham.
For a New Eltham Candy hob enquiry after a circuit trip, describe which zones were being used and any message seen before the supply stopped. Leave the appliance unused rather than resetting repeatedly, and include safe entry and kitchen access details when arranging a visit.
Give your full SE9 postcode, the Candy model reference and a contact who can arrange access. An area name does not confirm a booking; the team checks the appliance, work and available appointment together.
Prepare my Candy enquiryPlan access before the appointment.
Tell us about furniture doors, stacking, stairs or anything restricting safe access to this electric hob. Leave fixed equipment installed. Keep any previous repair record available and explain what has changed since it was written.
Visits are Monday to Thursday. Confirm the visit window, charges and responsibility for approving work when booking.
View New Eltham on the area mapWATCH & LISTEN
Electric hob — a short enquiry guide
A short narrated guide to the details that help us assess your enquiry.
Open the video and transcriptRELEVANT FAULT GUIDANCE
Explore the symptoms before your enquiry.
These guides explain useful observations. Your exact model’s instructions and an inspection determine the appropriate work.
Can I raise the hob's power-limit setting when it prevents a higher heat selection?
A configured total-power limit may reflect the electrical installation. Bosch's PXY instructions describe that relationship, so increasing the setting is not an ordinary way to improve a slow meal without checking why it was configured.
Read the guide Electric hobsWhy does the induction hob alternate between two power numbers?
On some models this shows a requested setting and the lower level currently available through power management. Check the exact display explanation before treating it as a fault code.
Read the guide Electric hobsWhy does only the inner circle heat on my ceramic double zone?
Some ceramic zones have an outer heating ring that must be selected separately. Choosing a high heat level may still leave only the smaller inner area active.
Read the guide Electric hobsWhy does one control change both zones after I enable bridge mode?
A bridge function links compatible zones for one larger vessel, so shared power and timer settings can be intentional. It is different from two independent pans on separate zones.
Read the guide Electric hobsHow can I tell whether my glass hob is induction or radiant ceramic?
Check the model information or manual. Both types can have a glass-ceramic surface, so appearance and the word ceramic alone do not identify how the hob heats.
Read the guide Electric hobsWhat if one induction zone will not heat any suitable pan?
If several known compatible pans fail on one correctly selected zone, the zone or its control may need assessment. That pattern is more informative than one unsuitable pan failing.
Read the guideNEARBY REPAIR ENQUIRIES