General guidance · Washer dryers

Check the drying technology

AEG describes water use to cool components and condense moisture on applicable machines. Confirm the requirement in your model manual, especially if you have moved from a separate tumble dryer or own a heat-pump combination. Do not close the supply simply because the washing stage has finished.

Describe a stop after the tap was closed

Record whether drying began normally, whether a fill warning appeared and when the tap position changed. Reopen only an ordinary accessible supply according to the documented setup; do not disconnect hoses to prove the explanation. If poor drying continues with the required supply available, retain the exact programme and warning details. Water availability is one condition, not a diagnosis of every damp result.

Useful observations

  • Read the water-supply requirement for drying.
  • Check the normal accessible tap position.

Details to include in your enquiry

  • Was the tap closed after the wash stage?
  • Is the machine a conventional or heat-pump washer-dryer?

An inspection confirms the fault. Do not dismantle the appliance or reproduce an unsafe symptom to answer a question.

Further information

Your model’s instructions take precedence over general guidance.