General guidance · Washer dryers

Connect the leak with the maintenance history

Miele identifies an insufficiently tightened or cross-threaded drain filter among causes of leakage at the lower access panel. Tell the engineer which filter was removed, whether more than one was present and whether it resisted refitting. Note any damaged seal, cracked plastic or part left over. Water reaching this area can have other causes, so a recent cleaning attempt does not prove the filter is the only issue.

Do not force the closure

Stop use and close the accessible water supply if leakage continues. Do not open the filter while water may be hot or retained, and do not use tools to force a reluctant cap into place. Follow only the exact owner procedure when its draining and cooling conditions can be met. If the filter will not seat normally, arrange assessment before another wash. Towels beneath the panel are not a repair and should not be used to justify further testing.

Useful observations

  • Describe any resistance or uncertainty when the filter was refitted.
  • Keep any displaced part for inspection.

Details to include in your enquiry

  • Did leakage begin only after the filter was opened?
  • Was more than one filter removed, and is each in its correct position?

An inspection confirms the fault. Do not dismantle the appliance or reproduce an unsafe symptom to answer a question.

Further information

Your model’s instructions take precedence over general guidance.