General guidance · Tumble dryers

Check the arrangement before assuming a pump fault

Look at the installation paperwork or an accessible external hose without pulling the machine out. A condenser or heat-pump dryer connected to a suitable drain may not fill its removable tank in normal use. Record whether this arrangement is new and whether the laundry actually dried. A barely damp load also gives less useful evidence than a previously familiar load.

Report a change in water collection

If the dryer previously filled its tank and now leaves wet clothes, describe both changes together. Include a tank warning, floor leak or premature finish if observed. Follow the manual for seating the removable container and permitted filter care. Do not pour water into the machine, disconnect hoses or run repeated empty programmes to test the collection system. Seek assessment for a continuing unexplained change.

Useful observations

  • Note whether the tank has ever collected water since installation.
  • Keep the model number and details of any external drain kit.

Details to include in your enquiry

  • Is water supposed to collect in the tank or flow to household drainage?
  • Did the laundry dry normally despite the empty container?

An inspection confirms the fault. Do not dismantle the appliance or reproduce an unsafe symptom to answer a question.

Further information

Your model’s instructions take precedence over general guidance.